Maintain the light level
Choose the lumen output and beam you need, then reduce the power used per bulb.
Commercial lighting · Multi-point projects
High-Efficiency Lighting for Multi-Point Replacement
Replace 10, 60 or 100+ light points with the right output — and lower the energy used at every point.
- Output-led matching
- Consistent project specifications
- 10, 60 and 100+ light points
Plan the whole project
Estimate energy and cost savings across every light point before ordering.
Standardise the specification
Keep socket, colour temperature, beam angle and dimming consistent across the installation.
60-light example · Adjustable
See the energy impact before you buy
Start with a typical GU10 project, then adjust the quantity, operating hours and electricity price.
Estimated annual project saving
€3,094 10,315 kWh less electricity per yearExisting system10,950 kWhper year
GY replacement635 kWhper year
This example applies to directional GU10 spotlight replacement. Estimates depend on operating hours, electricity tariffs and the actual lamps being replaced. Confirm lumen output, beam angle and fixture compatibility before ordering.
How the Class A savings and payback work
The main result above compares the GY directional GU10 spotlight with the existing GU10 spotlight wattage you entered. The example below separately compares the 2.9W Class A spotlight with a typical 5.5W Class F GU10 spotlight to show how the higher purchase price can be recovered through lower electricity use.
| Directional GU10 comparison | Power | Useful flux | Flux ÷ power | EU ηTM | Rated life | Example unit price | Annual electricity cost |
|---|---|---|---|---|---|---|---|
| GY GU10 Class A LED spotlight | 2.9W | 520 lm | ≈179 lm/W | ≈211 lm/W | Up to 50,000 h | €2.09 | €3.18 |
| Class F GU10 LED spotlight reference | 5.5W | ≈470 lm | ≈85 lm/W | ≈100 lm/W | 25,000 h reference | €0.80 | €6.02 |
Annual electricity saving€171for the selected quantity
Example purchase-price premium€77.40€1.29 more per bulb
Simple energy payback5.4 monthsat the selected hours and tariff
At 60 spotlights, 10 hours/day and €0.30/kWh, the example price premium is recovered in approximately 5.4 months. A 50,000-hour rated life corresponds to approximately 13.7 years at this daily usage.
Calculation method and assumptions
For a mains-voltage directional light source, EU energy labelling uses total mains efficacy ηTM = (useful luminous flux ÷ on-mode power) × FTM, with FTM = 1.176. For the GY spotlight: 520 lm ÷ 2.9W × 1.176 ≈ 211 lm/W (approximately 210 lm/W after declared-value rounding). The unadjusted flux-to-power ratio is approximately 179 lm/W. Annual electricity cost per spotlight = watts ÷ 1,000 × hours per day × 365 × electricity price. Simple energy payback = example purchase-price premium ÷ annual electricity-cost saving. The Class F spotlight, price, output and life figures are comparison assumptions, not a quote or a guarantee. Total lumens alone do not establish equivalent directional performance: compare beam angle, centre-beam intensity, colour temperature and fixture conditions. Results exclude installation, maintenance, taxes and tariff changes. Actual lifetime depends on operating conditions.
Specification certainty
One replacement plan, consistently specified
Select the performance details before purchase so every delivered lamp supports the same installation plan.
SocketGU10, E27, E14, MR16, G4, G9, GX53
Colour temperatureWarm, neutral or daylight
Beam angleMatch task and coverage
DimmingConfirm driver compatibility
Light outputCompare lumens, not watts alone
Energy classVerify the exact product rating
One specification per packfor a consistent replacement plan. Order separate packs when a project needs different specifications.
Procurement path
Choose the route that fits your project
Buy a 60-pack
Choose the exact colour temperature and pack option on the compatible product page.
View GU10 2.9W packs →Get a tailored project quote
Share quantities and specifications for availability and project guidance.
Request a project quote →Check compatibility first
Match the socket and target output before choosing a product or pack.
Use the replacement calculator →Bulk pricing
Pack savings after the specification is clear
The pricing advantage supports the project decision; it does not replace output and compatibility checks.
| Product | Standard pack | 60-pack | Indicative unit-price reduction |
|---|---|---|---|
| GU10 2.9W Class A | €2.99 / bulb | €2.09 / bulb | 30% |
| GU10 4W Class A | €3.17 / bulb | €2.20 / bulb | 31% |
| E27 8W Class B | €3.08 / bulb | €2.17 / bulb | 30% |
Indicative comparison calculated from the unit prices previously displayed on this page. Product-page pricing at the time of order applies.
Project questions
Plan with fewer surprises
Does a bulk order have the same warranty?
Bulk packs are covered by the warranty stated for the corresponding product. Check the product page and warranty policy for the applicable terms.
Can different models be mixed in one 60-pack?
No. One 60-pack contains one specification for consistent lighting and performance. Order separate packs for different models or specifications.
How quickly can a bulk order be delivered?
Delivery is typically 3–5 business days when stock is available. Timing for large or mixed projects is confirmed based on quantity, destination and current availability.
Can I order more than one bulk pack?
Yes, subject to stock availability. For 100+ light points or mixed specifications, request a project quote before ordering.
